MOTHER GIGABYTE N4120I H (Mother+CPU+VGA c/Puerto Serie)

1. Built in with an Intel^® Quad-Core Celeron^® N4120 (2.6 GHz)
   * Do not disassemble the onboard SoC and the heatsinks by yourself to avoid damage to these components.
2. 4 MB Cache

1. 2 x DDR4 SO-DIMM sockets supporting up to 16 GB of system memory
2. Dual channel memory architecture
3. Support for DDR4 2400/2133 MHz memory modules
4. Support for non-ECC memory modules

(Please refer “Memory Support List” for more information.)

Integrated in the SoC:

1. 1 x D-Sub port, supporting a maximum resolution of 1920×1200@60 Hz
2. 1 x HDMI port, supporting a maximum resolution of 4096×2160@60 Hz
   * Support for HDMI 2.0 version and HDCP 2.2.

1. Realtek^® Audio CODEC
2. High Definition Audio
3. 2/4/5.1/7.1-channel
   * You can change the functionality of an audio jack using the audio software. To configure 7.1-channel audio, access the audio software for audio settings.

1. Realtek^® GbE LAN chip (1 Gbps/100 Mbps)

1. 1 x PCI Express x1 slot, running at x1
   (The PCIEX1 slot conforms to PCI Express 2.0 standard.)
2. 1 x M.2 Socket 1 connector for the wireless communication module

Integrated in the SoC:

1. 1 x M.2 connector (Socket 3, M key, type 2280/2260/2242 SATA and PCIe 2.0 x2 SSD support)
2. 2 x SATA 6Gb/s connectors
   * Refer to “2-6 Internal Connectors,” for the installation notices for the M.2 and SATA connectors.

Integrated in the SoC:

1. 4 x USB 3.2 Gen 1 ports (2 ports on the back panel, 2 ports available through the internal USB header)
2. 4 x USB 2.0/1.1 ports (2 ports on the back panel, 2 ports available through the internal USB header)

1. 1 x 24-pin ATX main power connector
2. 1 x 4-pin ATX 12V power connector
3. 2 x SATA 6Gb/s connectors
4. 1 x SoC fan header
5. 1 x system fan header
6. 1 x M.2 Socket 3 connector
7. 1 x front panel header
8. 1 x front panel audio header
9. 1 x USB 3.2 Gen 1 header
10. 1 x USB 2.0/1.1 header
11. 1 x parallel port header
12. 1 x serial port header
13. 1 x Trusted Platform Module (TPM) header (2×6 pin, for the GC-TPM2.0_S module only)
14. 1 x Clear CMOS jumper

1. 1 x PS/2 keyboard port
2. 1 x PS/2 mouse port
3. 1 x serial port
4. 1 x D-Sub port
5. 1 x HDMI port
6. 2 x USB 3.2 Gen 1 ports
7. 2 x USB 2.0/1.1 ports
8. 1 x RJ-45 port
9. 3 x audio jacks

1. iTE^® I/O Controller Chip

1. Voltage detection
2. Temperature detection
3. Fan speed detection
4. Fan speed control
   * Whether the fan speed control function is supported will depend on the cooler you install.

1. 1 x 128 Mbit flash
2. Use of licensed AMI UEFI BIOS
3. PnP 1.0a, DMI 2.7, WfM 2.0, SM BIOS 2.7, ACPI 5.0

1. Support for Xpress Install
2. Support for @BIOS
3. Support for APP Center
   * Available applications in APP Center may vary by motherboard model. Supported functions of each application may also vary depending on motherboard specifications.

1. Norton^® Internet Security (OEM version)
2. LAN bandwidth management software

1. Support for Windows 11 64-bit
2. Support for Windows 10 64-bit

1. Mini-ITX Form Factor; 17.0cm x 17.0cm